measure CO2, temperature & humidity
- Portable or wall-mounted
- Battery or mains powered
- Data logging or spot measurements
- Optional visual and audible alarms
The CO2-Sense range of meters are designed to measure carbon dioxide (CO2), temperature and relative humidity with a self-contained data logger. There are also options for audible alarms and LCD display screen.
The CO2-Sense meters are portable or wall mounted environmental data logger designed to measure up to 1% (10,000ppm) or 30% (300,000ppm) carbon dioxide, temperature, and relative humidity in remote locations. It “wakes up”, takes readings, stores them in memory, and goes back to sleep.
The CO2-Sense operates off AA-batteries or can be connected to mains power supply for long-term monitoring. The battery operated logger can save up to 15,000 data points at a time, including date, time, CO2, temperature and %RH.
In addition, the data logger has a built-in audible (80db) alarm and a LCD back-lit display that provides visual indication of the current CO2 conditions; Green, Yellow, and Red. The alarm is set by default for LEED levels, but can be user programmed to other standards.
This combination of functions provides for a portable monitor alarm system meeting the requirement of Indoor Air Quality surveys.
- ESCM-16 CO2-Sense: 0 to 1% CO2 range, LCD display, alarm, and data logger
- ESCM-17 CO2-Sense: 0 to 30% CO2 range, LCD display, alarm, and data logger
- ESCM-18 CO2-Sense: 0 to 1% CO2 range and data logger
- ESCM-213 CO2-Sense: 0 to 30% CO2 range and data logger
|Measurement Principle||NDIR (Non-Dispersive Infra-Red)|
|Measurement Range||0 – 10,000 ppm (0 to 1 %) | 0 – 300,000 ppm (0 to 30 %)|
|Data Logging||30 seconds to 18 hours sample interval|
|Accuracy||± 30ppm ± 3% of measured value|
|Calibration||Feild calibration utility via supplied s/w to N2 or 400 PPM|
|Data Logging Memory||15,000 log entries maximum, includes time stamp, CO2, Temp, %RH|
|Sensor Lifetime||approx. 10 years|
|Maintenance Interval||No maintenance required|
|Size||146 × 91 × 33 mm|
|LCD Displays||CO2 in PPM, Temp, and %RH|
|Power Supply||4 x AA batteries | Mains power supply|
manual & docs
Free Easy-to-use GasLab® Software
This device uses GasLab® software for setup, calibration, data logging, and real-time data analysis.
GasLab® makes it easy to export data into a .CSV file that can be imported into any industry-standard software or spreadsheet.
GasLab® runs on Windows XP or higher, and free to use with our products.